Plastic Tubing
Plastic tubing of various lengths and bores constructed of materials suitable for general laboratory, biopharmaceutical, food and beverage, medical, vacuum, low-pressure, high-pressure, cleanroom or environmental applications. Products may be chemical- or corrosion-resistant. Formulated for resistance to flex fatigue and abrasion, plastic tubing is more flexible and less permeable than rubber tubing.
How Is Plastic Tubing Used?
Flexible plastic tubing may be used as transfer lines for contamination fluid control, hydraulics, protective jacketing, vacuum pump and diaphragm pump feeds and discharges, refrigeration, water and fluid lines, food and beverage, instrumentation, research laboratories, agriculture, material handling, air and gas lines, chemical lines and pharmaceuticals.
Types of Plastic Tubing:
• PVC: lightweight and flexible, will retain its bore on bending and can be sterilized up to 121°C
• Silicone: ideal where a hard-wearing material is needed, including transfer of liquids or higher temperature environments
• LDPE: good for general low pressure and temperature, instrumentation, corrosive atmosphere, and food processing
• PTFE: has excellent chemical-resistant and temperature-resistant properties
• PE: flexible, lightweight, durable, and corrosion resistant, used for a wide range of liquid, gas, and fluid transfer applications
• FEP: clear, small-diameter tubing, the economical choice for chemical resistance and broad temperature exposure
• PEEK: high-performance polymer with mechanical and chemical resistance, and highly resistant to thermal degradation
AVANTOR MASTERFLEX (VWR LLC) 3-STP PHARMED 2.79MMID 12PK
Masterflex Ismatec Pump Tubing, 3-Stop, PharMed BPT, 2.79 mm ID; 12/PK, Avantor
Nordson Medical T RDCTN TUB FTTNG 14IN332IN CS
This item has a minimum qty of 5000 per supplier requirements.
AVANTOR MASTERFLEX (VWR LLC) Cole-Parmer TUBING C-FLEX 3/8 X 5/8", 350Ft
NC0283834 CFLE .375X.625X.125IN 350FT
AVANTOR MASTERFLEX (VWR LLC) Masterflex Transfer Tubing, Tygon 3370 I.B. Reinforced Platinum-Cured Silicone, 1/4"" ID x 1/2"" OD; 50 ft
Formulation: Tygon 3370 I. B., silicone, platinum cured. Applications: Demanding sanitary high-pressure pharmaceutical, biotechnology, food and beverage, and cosmetic applications. Characteristics: Excellent heat resistance, low compression set, odorless, and nontoxic. Translucent. Certification: Elastomer is FDA-compliant (21 CFR 177.2600) and USP Class V extractables; exceeds Class VI implant; exceeds 3A Sanitary Standards; produced to Bulk Pharmaceutical cGMPs (FDA 21 CFR 210, 211). Tubing manufactured according to GMP Temperature range: ¿60 to 320¿F (¿51 to 160¿C) Sterilize: With autoclave, ethylene oxide, or gamma irradiation.
Grainger InsulMultitapCon PVC 6 AWG 250 kcmil
The Grainger Insulated Multitap Wire Connectors are PVC insulated wire connectors that allow multiple wires to be joined together in a single connector. They feature a split bolt design that allows wires to be inserted by spreading apart the connector. The PVC insulation helps prevent shorts and corrosion. These connectors are UL listed and CSA certified. They come in a range of sizes to accommodate different wire gauges and number of wires. Overall, these are high quality, versatile multitap connectors suitable for a variety of electrical applications requiring joining multiple wires.